durabilityensure that the shaker can operate well at full rate and high speed.
Sterilization system (CO2 shaking incubator)
90ºC high temperature moist heat sterilization system
• Entire high-temp. moist heat sterilization inside the chamber (incl. temperature sensor, CO2
concentration sensor, fan, partition and stand), thoroughly eliminating the microbial contamination
made by varieties of microorganism during cell culture, such as bacteria, mold, mycoplasma, etc.,
and consequently allowing users to work in a safe experimental environment.
• Simple operation: press on the (sterilization start) button in the control panel to allow the
sterilization system to conduct thorough sterilization on all components in the incubator (including
temperature sensor, carbon dioxide concentration sensor, fan, partition and bracket).
Carbon dioxide monitoring and control system (CO2 shaking incubator)
• Utilize the foreign infrared sensor able to accurately monitor CO2 gas at fast speed with
freedom from impact of external temperature and humidity change. Uniform distribution of CO2
concentration can be steadily maintained despite frequent opening/closing the door by more than
one operator. What user is expected to do is to put in place CO2 gas supply.
• The CO2 gas inlet is equipped with an adequate microbial filter able to filter off particles with
grain size of ≥0.3μm, as high as 99.99%,so that bacteria, micronic dust particle and microbial
contamination source in CO2 gas can be effectively eliminated.
Temperature and humidity control system (for CO2 shaking incubator)
• Use of temperature and humidity sensor operating at high temperature to ensure adequate
temperature and humidity control in the incubator. Meanwhile, test temperature and humidity can
be restored in a short time when user takes the sample out of the incubator or put it inside the
incubator.
Door temperature heating and monitoring system (CO2 shaking incubator)
• The outer door and observation window can be heated. The door temperature varies in response
to the incubator temperature and is slightly higher than the incubator temperature, thus preventing
condensate formation on the door, facilitating access to viewing the entire test process and
eliminating potential microbial contamination arising from condensate.
Functions expansion (optional)
• Illumination control. (To simulate natural growth environment)
• Humidity monitoring and control.
Safety function
• Door switchable to provide auto stopheating and shakeronce the door is openning, gentle air flowto eliminate temperature overlimit.
• Unique speed control circuit able to ensure steady shaker start, and prevent instrument damage by overspills.
• Independent temperature limit alarm system able to automatically stop heating once temperature limit is exceeded, thus ensuring operation at safety.
• The circulating fan can automatically operate at different speed, thus preventing sample evaporation arising from overspeed of the circulating fan.
• Standard USB data transfer port (U disk) or optional RS-485 port (either-or). Monitor temperature, speed, time and alarm via computer being
connected. An embedded printer may be considered (optional)
Hierarchical authority management (optional)
• There are multiple accounts that can be assigned. Whenever necessary, the right to operate the equipment controller is separately assigned to
administrator, operator and visitor.
Audited Supplier 
){kind=link}
){kind=link}