| Customization: | Available |
|---|---|
| Classification: | Syringe Pump |
| Type: | Syringe Pump |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| LINS-7 INFUSION PUMP | |
| Dimensions(mm): | 140(L)x160(W)x220(H) |
| Weight | about 2.15Kg |
| Power Supply: | AC 100~240V,50/60Hz |
| Built-in Batteries: | DC 12V 1800mAh,Ni-MH, rechargeable |
| Battery Continuous Use Time: | Above 6hours |
| Rated Consumption | ≤18VA |
| Infusion Flow Selection: | 0.1m//h~1200ml(6~150d/min), original value is 0.1ml(1d/min) |
| Infusion Range: | 0.1ml/h~9999.9ml, original value is 0.1ml |
| Flow Rate Precision: | volume mode ±5%, drop mode ±2d |
| KVO: | 1ml/h or 3ml/h |
| Occlusion Pressure Level: | High:110kPa+20kPa(825mmHg+150mmHg) |
| Middle:80kPa+30kPa(600mmHg+225mmHg) | |
| Low: 60kPa+20kPa(450mmHg+150mmHg) | |
| Use Environment: | Temperature 5 C ~43 ºC |
| Relative Humidity < 90%RH (Under without condensation status) Atmospheric Pressure 860hPa~1060hPa |
|
| Storage Environment: | Temperature -20 ºC~+55 C |
| Relative Humidity <9 5%RH (Under without condensation status) Atmospheric Pressure 860hPa~1060Pa |
|
| Waterproof Level: | IPX1 (drip-proof) |
| Electric Shock Protection: | Class I, Type BF |
| Alarm: | occlusion, finish, low battery, standby (no operation), air in line, door open, AC power disconnected etc |
| Keep-Vein-Open (KVO): | After finishing predetermined infusion volume, to prevent the formation of thrombus, continue infusion with preset minimum rate 1ml/h or 3ml/h (setted) |
| Power Supply Switching Function: | When the AC power supply is off, it will automatically switch to internal battery power supply and prompt at the same time. When AC is switched on, it is automatically converted back to AC supply |
| Repeat Alarm Function: | After the operator presses the " key, if the reason causing the alarm has be untreated for about 2 minutes, the alarm will sound again to alert the operator to solve the problem. |
){kind=link}