Water jacket CO2 incubator is designed for long time stable culture. The control temp. is stable and accurate, suitable for the
microorganisms culture with long cycle and not need to open door often.
Intelligent touch screen controller
Replace traditional button operation to touch screen interface.
It can display on time performance curve. You can check the temp., humidity
(option) and CO2 concentration three group curves changes at the same time.
And abnormal alarm and door open or close message.
When parameters are set, the controller will lock the screen automatically, it
avoid unauthorized person wrong operation on the machine.
72 hours machine performance inquiry, it is convenient for user to check
abnormal situation and track historical running information.
RS-485 communication port as options can be remote control on computer
for monitoring the running and start or close the machine.
CO2 concentration sensor
You may need to open door frequently during experiment, infrared sensor
is the best choice under this circumstances. Our infrared sensor is very
sensitive to CO2 concentration varies and it will be not affected by inside of
incubator chamber conditions, measured accurately. It doesn't like traditional
thermal probe that will be sensitive to chamber temp., and humidity that lead
to incorrect CO2 concentration data.
If open the door for 30s and close the door, within 3 min the CO2 concentration
can resume to the set value 5%.Even if there are many people use the same
machine and frequently open and close door, the inside chamber can still
maintain CO2 concentration stable and uniform.
Temperature control and monitoring system
A.Incubator temperature control system
PT100 temp. sensor keeps inside chamber temperature accurate. It can
adjust the heating power according to the temp. differences between actual
temp. in the chamber and set temp. to make sure temp. in the chamber is
accurate. It can resume experiment temp. in 3 min after user open and close
door to take samples.
B.Water jacket heating system
Water jacket heating method to ensure working chamber temperature is uniform,
when it is power off, the chamber can maintain the temp. for a long time.
C.Door heating system
Outer door ring has heating function. The temperature of door ring will be a
little bit higher than temp. in the chamber to prevent condensed water coming
from the inner glass door. It facilitates observe the experiment process, also it
avoid the biological pollution possibility due to the condensed water from the
inner glass door.
D.Over temp. protection system
It is an independent backup temp. control system besides the CO2 incubator
temp. control system. When the incubator temp. control system failed and
caused temp. lose control, the chamber temp. reaches to the over temp.
limiter set value, over temp. protection system will cut down the heating and
alarm audible with light.
Documentation and failure diagnostic display (Option)
All data can be stored through RS485 port, if any failures, user can read the
diagnostic message and data from computer at any time.
Audited Supplier 
){kind=link}
){kind=link}